Victron Energy
Victron Energy IP22 Blue Smart Battery Charger 24V MODEL
Victron Energy IP22 Blue Smart Battery Charger 24V MODEL
Couldn't load pickup availability
Victron Blue Smart IP22 Charger- 24V MODEL
*Please note: Just like with larger chargers, you must use your own high-strand DC cables (up to 6 AWG), which easily attach to the charger via built-in clamps.
Bluetooth Smart
The Blue Smart IP22 Charger includes built-in Bluetooth, allowing you to monitor voltage and current, change settings, and perform firmware updates wirelessly using the free VictronConnect app. New features and functionalities can be added via firmware updates.
High Efficiency
With up to 94% efficiency, the IP22 generates up to four times less heat than industry-standard chargers. Once the battery is fully charged, its power consumption drops to just 0.5W—5 to 10 times better than the typical standard.
Adaptive 6-Stage Charging Algorithm
The charger uses a microprocessor-controlled ‘adaptive’ algorithm: Test – Bulk – Absorption – Recondition – Float – Storage. It automatically adjusts the charging process based on the battery’s usage and condition to optimize performance and longevity.
Storage Mode (for Pb batteries)
When a battery hasn’t been discharged for 24 hours, the charger enters storage mode, lowering float voltage to 2.2V/cell (13.2V for 12V batteries) to reduce gassing and corrosion. Once a week, voltage is raised back to absorption level to prevent electrolyte stratification and sulfation—two common causes of premature battery failure.
LiFePO4 Battery Compatible
The IP22 can also charge LiFePO4 batteries using a simple Bulk – Absorption – Float algorithm.
Fully Discharged Battery Recovery
The charger can recover batteries that have been discharged down to 0V, including LiFePO4 batteries whose BMS has shut them down. It enables “wake-up” functionality, reconnecting and charging the battery safely from a fully discharged state.
NIGHT and LOW Modes
In NIGHT or LOW mode, output current is reduced to 50% or less of nominal, and operation is completely silent. NIGHT mode ends automatically after 8 hours, while LOW mode must be exited manually.
Overheat Protection
Output current is automatically reduced as the ambient temperature approaches 122°F. If temperatures exceed 140°F, the charger shuts down to protect both itself and the connected battery.
LED Status Indicators
Eleven LEDs display charging status across all stages: TEST, BULK, ABSORPTION, RECONDITION, FLOAT, STORAGE, and READY.
MODE Button Options
Select from NORMAL (14.4V), HIGH (14.7V), RECONDITION, or LI-ION modes based on battery type and condition.
Industry-Leading Warranty
Backed by Victron’s 5-year warranty (excluding batteries), the Blue Smart IP22 Charger is supported by a global network of authorized Victron dealers and distributors.
Share
Victron Blue Smart IP22 Charger- 24V MODEL
*Please note: Just like with larger chargers, you must use your own high-strand DC cables (up to 6 AWG), which easily attach to the charger via built-in clamps.
Bluetooth Smart
The Blue Smart IP22 Charger includes built-in Bluetooth, allowing you to monitor voltage and current, change settings, and perform firmware updates wirelessly using the free VictronConnect app. New features and functionalities can be added via firmware updates.
High Efficiency
With up to 94% efficiency, the IP22 generates up to four times less heat than industry-standard chargers. Once the battery is fully charged, its power consumption drops to just 0.5W—5 to 10 times better than the typical standard.
Adaptive 6-Stage Charging Algorithm
The charger uses a microprocessor-controlled ‘adaptive’ algorithm: Test – Bulk – Absorption – Recondition – Float – Storage. It automatically adjusts the charging process based on the battery’s usage and condition to optimize performance and longevity.
Storage Mode (for Pb batteries)
When a battery hasn’t been discharged for 24 hours, the charger enters storage mode, lowering float voltage to 2.2V/cell (13.2V for 12V batteries) to reduce gassing and corrosion. Once a week, voltage is raised back to absorption level to prevent electrolyte stratification and sulfation—two common causes of premature battery failure.
LiFePO4 Battery Compatible
The IP22 can also charge LiFePO4 batteries using a simple Bulk – Absorption – Float algorithm.
Fully Discharged Battery Recovery
The charger can recover batteries that have been discharged down to 0V, including LiFePO4 batteries whose BMS has shut them down. It enables “wake-up” functionality, reconnecting and charging the battery safely from a fully discharged state.
NIGHT and LOW Modes
In NIGHT or LOW mode, output current is reduced to 50% or less of nominal, and operation is completely silent. NIGHT mode ends automatically after 8 hours, while LOW mode must be exited manually.
Overheat Protection
Output current is automatically reduced as the ambient temperature approaches 122°F. If temperatures exceed 140°F, the charger shuts down to protect both itself and the connected battery.
LED Status Indicators
Eleven LEDs display charging status across all stages: TEST, BULK, ABSORPTION, RECONDITION, FLOAT, STORAGE, and READY.
MODE Button Options
Select from NORMAL (14.4V), HIGH (14.7V), RECONDITION, or LI-ION modes based on battery type and condition.
Industry-Leading Warranty
Backed by Victron’s 5-year warranty (excluding batteries), the Blue Smart IP22 Charger is supported by a global network of authorized Victron dealers and distributors.
